Test with the relay and track call button disconnected from the interface. The LEDs are infrared and invisible to the human eye. The infrared kit/bridge doesn't work, the LEDs don't come on. This connector is for future use and is not currently supported. Plug the sensor cable into “Lanes 1 to 4” for 4 lane tracks, plug the second cable into “Aux / 5-8” for more than 4 lanes.
It does NOT run on Chrome books or Mac computersĪfter installing Software you can click Help for complete Documentation on Hardware Installation and Software settings. Lap counter can be used with a computer running Windows XP,7,8,10,11 32 or 64 bit. Note: for the new Blue interfaces sold in 2022, Download software Version 9.70 or higher, Click Help and install USB Driverĭo not use a USB extension cable, that will cause problems or may fail at any time during a race and give an error. Restart the Trackmate software and try again. Unplug USB cable for a few seconds and plug it back in If you get the interface not found error. I get “Trackmate Interface not found” message when I start a race
